Create Trace Crossovers

Subject: Route two traces over one another using a DPatch via.

Advantage: Automatically places dielectric patches and bridges where traces on the same layer cross. 

Specifications:

• Route C2, 1 to J1,2 (to be upper)
• Route R4, 2 to C4,1 (to be lower trace)
• DPatch Values:
  • Overlap (lower level) = "0.01"
  • Overlap (upper level) = "0.01"
  • Via Extension from Trace = "0.005"
  • Via Side Offset from trace = "0.005"

© Copyright 2005  CAD Design Services, Inc.  -  All rights reserved. Reproduction or Copying of Images is Prohibited! www.cad-design.com