Create Tie Vias on Lands

Subject: Place ground ties on Ground "G" nets and eliminate any that violate DRC rules.

Advantage: Places ties on each specified net automatically.

Specifications:

• Trace width = "0.01"
• Pad to Via clearances = "0.01"
• Assign to Net "G"
• Use VIA-D02-D04 via 
• Place ties on all sides that pass DRC
• Place on components that tie to Ground (G) 

© Copyright 2005  CAD Design Services, Inc.  -  All rights reserved. Reproduction or Copying of Images is Prohibited! www.cad-design.com